Note the use of cargo electric bikes Introduction

    With the increasing amount of cargo electric bikes , which Precautions more and more people 's attention , following on to make a specific introduction .
    For the first passenger electric tricycle battery connected Wire must comply with the relevant provisions of electrical installation , connection between the battery and the wire welded or bolted connection, the connection must be strong and must not damage the terminal and seal parts during the welding operation, cable does not allow cross , overlap , and by squeezing phenomenon , installation should be preceded by disconnecting the electric vehicle power door locks to prevent sparking phenomenon when wiring caused the explosion , tools used to install insulation measures should be taken , cables put an end to the phenomenon when a short circuit occurs , so that other parts of cis bad electric tricycle .
    Everyday driving cargo bicycles should be avoided on the air is humid , high temperature and corrosive gases , so as not to make the paint surface plating metal parts chemical corrosion , should avoid prolonged exposure to the sun and rain cargo bikes , so as not to the controller component damage , causing operation failure, accidents , such as when the local charging voltage instability, easy to make charger fuse is recommended to use the AC voltage regulator , in addition to riding should not be overloaded , heavy items should be placed and with the people, in order to avoid damage to the battery and motor , regularly deal with the front axle , rear axle , axis , flywheel , fork, shock absorbers and other parts of the pivot point for maintenance , thereby reducing its failure during operation.